• All work for building permits must be shown on scaled plans (1/4 or 1/8 scale) on a minimum
     18”x24” sheets which include: Site Plan, Floor Plan, Structural Plans, and Architectural Elevations
     when required by planning, (exceptions can be made for very small projects such as walls or 
     interior improvements).
•  Plans shall include project address, name, and telephone number of the owner and person
     responsible for the preparation of the plans.
• Plans must clearly communicate scope of all required setbacks from property lines. Exception,
     replacement windows, reroofs, and other minor repair work do not require plans.
• Electrical—Plans must show Panel Schedule, Load Calculations, Lighting Fixtures/Switches/Outlets
     location.
• Mechanical— Plans must show location of HVAC System, Single Line Duct Diagram giving sizes
     and supply and return locations.
• Plumbing—Plans must show fixture locations, Single Line Drawing showing DWV piping sizes.
• All new structures must submit a complete set of plans including: Architectural, Structural, Civil,
  • Mechanical, Plumbing, Electrical, Structural and Energy Calculations, Title 24. Partial plans will
       not be accepted.

•  All work for building permits must be shown on scaled plans (1/4 or 1/8 scale) on a minimum 18”x24” sheets which include: Site Plan, Floor Plan, Structural Plans, and Architectural Elevations when required by planning, (exceptions can be made for very small projects such as walls or interior improvements).
• Plans shall include project address, name, and telephone number of the owner and person
     responsible for the preparation of the plans.
• Plans must clearly communicate scope of work proposed and show all required setbacks from
     property lines.
• Electrical—Plans must show all Electrical Work on a floor plan, Energy Calculations, panel
     Schedule, and Load Calculations.
• Mechanical—New or Replacement of A/C Condensing Units must be shown on a site plan. Show
     supply and return locations.
• Plumbing—Plans must show fixture locations. (Note: If adding or deleting plumbing fixtures a
     letter from the Las Virgenes Water District is required prior to permit).
• All new structures must submit a complete set of plans including: Architectural, Structural, Civil,
     Mechanical, Plumbing, Electrical, Structural and Energy Calculations, Title 24. Partial plans will
     not be accepted.
  
  

Planning approval must be obtained prior to submitting for plan check on all projects.

All structural plans require plan check: This consists of: New Buildings, Additions, Retaining Walls,
Patio Covers, Gazebos, Pools, Any Structural Alterations, and Tenant Improvements.

• Electrical—All new services over 400 amps, tenant improvements with sub-panels connecting to
     400 amps or larger and any Energy Alterations.
• Mechanical—All new Commercial Buildings, Residential and Tenant Improvements.
• Plumbing—All new Commercial Buildings, Residential Tracts, and Custom Homes.
• Plan Check fees must be paid prior to submitting into Plan Check.

Unreasonable Hardship Form will be required to be filled out and submitted to Building & Safety Department on all Non-Residential additions or alterations.

• Fees are based on valuation of the project. (Material and Labor)
• Mechanical, Electrical and Plumbing are itemized.
• Any black and white copies are $0.25 per page, colored pages are $0.50.
• Copies of plans are $5.00 per page.